Networking and Telecom Glossary of terms

1. Bandwidth:

   The maximum amount of data that can be transmitted over a network connection in a given amount of time, usually measured in bits per second (bps) or megabits per second (Mbps).

2. Router:

   A networking device that forwards data packets between computer networks. It connects multiple networks together and directs traffic based on IP addresses.

3. Switch:

   A networking device that connects devices within a local area network (LAN). It operates at the data link layer of the OSI model and directs data packets to their intended destinations.

4. Modem:

   Short for “modulator-demodulator,” a modem is a device that modulates analog signals into digital signals for transmission over a network and demodulates them back into analog signals at the receiving end.

5. IP Address:

   An Internet Protocol (IP) address is a numerical label assigned to each device connected to a computer network. It serves as a unique identifier for locating and addressing devices on a network.

6. LAN (Local Area Network):

   A LAN is a network that connects devices within a limited geographic area, such as a home, office building, or school. It allows for the sharing of resources and data between connected devices.

7. WAN (Wide Area Network):

   A WAN is a network that spans a large geographic area, such as multiple cities or countries. It connects multiple LANs together and enables communication over long distances.

8. Firewall:

   A security device or software that monitors and controls incoming and outgoing network traffic based on predetermined security rules. It acts as a barrier between an internal network and external networks to protect against unauthorized access and threats.

9. VPN (Virtual Private Network):

   A VPN is a secure network connection that allows users to access a private network over a public network, such as the internet. It provides encryption and anonymity, enabling secure transmission of data between remote locations.

10. DNS (Domain Name System):

    The DNS is a system that translates domain names (e.g., www.example.com) into IP addresses. It acts as a directory for the internet, enabling users to access websites by entering domain names instead of IP addresses.

11. Latency:

    The time delay between when data is sent and when it is received. Latency is usually measured in milliseconds (ms) and can impact the performance and responsiveness of network applications. Networking and Telecom Glossary of terms

12. Packet:

    A unit of data that is transmitted over a network. It contains the payload (actual data) and control information, such as the source and destination IP addresses.

13. Router:

    A networking device that forwards data packets between computer networks. It connects multiple networks together and directs traffic based on IP addresses.

14. Ethernet:

    A widely used networking technology that defines the standards for the physical and data link layers of the OSI model. It allows for the transmission of data over wired connections using copper or fiber optic cables.

15. VoIP (Voice over Internet Protocol):

    VoIP is a technology that enables voice communication over the internet or other IP-based networks. It converts analog voice signals into digital data packets for transmission. Networking and Telecom Glossary of terms

16. 4G/5G:

    4G and 5G are generations of mobile network technology. 4G (LTE) provides high-speed wireless communication for mobile devices, while 5G offers even faster speeds, lower latency, and support for a larger number of connected devices.

17. ISP (Internet Service Provider):

    An ISP is a company that provides internet access to customers. It offers various types of internet connections, such as DSL, cable, fiber, or wireless, and may also provide additional services like email, web hosting, and virtual private networks.

18. PoE (Power over Ethernet):

    PoE is a technology that allows for the transmission of electrical power alongside data over Ethernet cables. It eliminates the need for separate power cables, making it convenient for devices like IP cameras, wireless access points, and VoIP phones.

19. MPLS (Multiprotocol Label Switching):

    MPLS is a protocol for efficient routing of network traffic. It uses labels to identify packets and determine their forwarding paths, improving the speed and reliability of data transmission in large networks. Networking and Telecom Glossary of terms

20. NAT (Network Address Translation):

    NAT is a technique used to translate IP addresses between different networks. It allows multiple devices on a LAN to share a single public IP address, enabling internet access for all devices.

    Read more :https://ohiotele.net/dayton-columbus-cincinnati-ohio/network-cabling/network-cabling-cat7-cat-7/

Foundation for Reliable Connectivity Introduction:

In the ever-evolving world of technology, Foundation for Reliable Connectivity networking plays a crucial role in connecting people, devices, and systems. Behind the scenes, the backbone of any robust network infrastructure lies in the quality and integrity of its cabling. While networking equipment and software are often in the spotlight, the importance of fresh and new cabling cannot be understated. In this blog post, we will explore why investing in fresh cabling is essential for maintaining a reliable and efficient network.

1. Enhanced Performance and Speed:

Network cables are the lifelines that transmit data signals between devices. Over time, older cables may become worn, damaged, or outdated, leading to signal degradation and reduced performance. By installing fresh and new cabling, you can ensure optimal data transfer speeds and minimize the risk of data loss or corruption. Modern cabling technologies, such as Category 6 (Cat6) or fiber optic cables, provide higher bandwidth capabilities, enabling faster and more efficient data transmission.

2. Reliability and Reduced Downtime:

Reliable connectivity is a cornerstone of any successful network infrastructure. Aging cables are prone to wear and tear, resulting in intermittent connectivity issues and unexpected downtime. Fresh cabling significantly reduces the risk of signal interruptions, providing a stable and dependable network connection. By investing in high-quality cabling, you can minimize disruptions, improve productivity, and maintain a seamless user experience. Foundation for Reliable Connectivity

3. Future-Proofing Your Network:

Technology is advancing at an exponential pace, and networks must adapt to accommodate growing demands. Fresh cabling allows you to future-proof your network infrastructure by supporting the latest networking standards and technologies. Whether it’s higher data transfer rates, increased bandwidth requirements, or the adoption of emerging technologies like Power over Ethernet (PoE), new cabling ensures compatibility and scalability for future network upgrades.

4. Improved Network Security:

In today’s interconnected world, network security is of paramount importance. Outdated cabling can present security vulnerabilities, as older cables may lack proper shielding or encryption capabilities. By investing in fresh cabling, you can implement the latest security features, such as shielded cables or fiber optic connections, which offer enhanced protection against external interference, data breaches, and unauthorized access. Foundation for Reliable Connectivity

5. Simplified Troubleshooting and Maintenance:

When network issues arise, troubleshooting can be a daunting task. Outdated or poorly labeled cables can lead to confusion and prolonged downtime during maintenance or repairs. Fresh cabling allows for organized and well-documented cable management, simplifying troubleshooting processes and reducing the time required to identify and resolve connectivity issues. Properly labeled cables enable quick and efficient maintenance, minimizing disruption to network operations.

Conclusion:

In the world of networking, fresh and new cabling forms the foundation for a reliable and efficient network infrastructure. Upgrading your cabling not only enhances performance, speed, and reliability but also future-proofs your network for emerging technologies. Investing in high-quality cabling ensures secure and seamless connectivity, simplifies troubleshooting, and reduces maintenance time. By prioritizing fresh cabling, you can create a robust and adaptable network infrastructure that meets the demands of today while preparing for the challenges of tomorrow. Foundation for Reliable Connectivity

Your voice matters, and we understand the importance of ensuring that your message is heard by everyone. Choosing a Signal Booster, our cellular amplification services go beyond the ordinary, leveraging our extensive expertise in this field.

With our help, numerous customers have improved their communication capabilities and strengthened their cellular signals. Whether you’re a college, a hospital, or the owner of a large 100,000 sq. ft. office complex, Ohio Tele.Net can tailor a custom cellular amplification solution to meet all your communication objectives.

Understanding Cellular Amplification

Are dropped calls, poor call quality, slow data, and delayed messaging familiar challenges when using your mobile device in certain areas? Your user experience suffers due to weak signal strength, and relying solely on the number of bars displayed on your device isn’t a reliable indicator of performance in a given location. The reality is far more complex. In the past, cellular technology often meant compromising quality for coverage, and users accepted a certain level of difficulty. However, today’s users, especially those who grew up with this technology, have different expectations. They demand seamless mobile device performance anytime, anywhere. This Choosing a Signal Booster shift in mindset is driving many to seek permanent, reliable solutions that enhance productivity and user experience.

Cellular Amplification Explained

Cellular amplification, also known as “signal boosting” or “signal repeating,” addresses the two primary factors causing poor cell phone reception. Its purpose is to amplify weak outside signals and bypass obstructions, thereby providing a strong, reliable inside signal to areas previously lacking coverage.

The system operates by installing an outside antenna in a location with existing signal, typically on the roof. The signal is then transmitted from the outside antenna through a cable to an amplifier inside the building. Once amplified, the signal is broadcasted to the desired area through an inside antenna, ensuring better reception. The system also works in reverse, amplifying and broadcasting the signal from your phone back to the tower, enabling robust two-way communication.

If you’re thinking, “Great! Thank you, Ohio Tele.Net . Now I can embark on a DIY project by searching online, adding items to my Amazon cart, and solving this issue within two days through my prime account,” we have a response for you. “Yes, you can certainly try that.” However, designing, installing, and operating a cellular amplification solution requires a certain level of expertise. If done incorrectly, you may attract the attention of the FCC Choosing a Signal Booster or carriers for interfering with frequencies. If that’s an adventure you’d like to embark on, feel free to proceed. Otherwise, give us a call.

Understanding Poor Cell Phone Signal

When it comes to weak cell phone signal, two main factors contribute to the problem: distance from the nearest cell tower and obstructions causing interference.

1. Distance from the Closest Cell Tower: Mobile carriers establish coverage through strategically placed cellular towers. Ideally, as you move within their network, your device automatically connects to the closest tower and seamlessly transitions between towers. However, as you approach the edge of the carrier’s coverage area, there may be no additional towers to connect to. Consequently, your device will experience a degraded signal the further it is from the nearest tower, resulting in dropped calls and inconsistent connections.
2. Obstructions Causing Interference: While cell signals generally travel through the air with ease, any objects encountered between the tower and your device can cause interference. Geographical elements like hills, mountains, and trees, as well as building materials such as metal siding, concrete, and wire mesh, can significantly disrupt the signal. Moreover, the rise of energy-efficient products like radiant barriers and window tinting has further contributed to reception problems in modern homes.

While either of these factors alone can lead to dropped calls and poor reception, the combination of both virtually guarantees issues. A Vision Cellular Amplification solution is specifically designed to address and mitigate these factors.

Choosing a Signal Booster

Simply get in touch with us, and we’ll arrange a site survey at your location. Our experienced team will bring advanced technical equipment to analyze your situation and design the optimal solution tailored to your specific needs.

Introduction Mobile Phone Repeaters:

In today’s fast-paced world, staying connected has become a crucial aspect of our daily lives. The advent of cell phones has revolutionized communication, enabling us to connect with loved ones, access information, and conduct business on the go. However, despite the advancements in mobile technology, many of us still face challenges with network coverage in certain areas. This is where mobile phone repeaters, also known as cell phone boosters, come into play. In this blog, we will explore the significance of being connected with our cell phones and how mobile phone repeaters enhance coverage to ensure seamless communication.

1. Constant Communication

Cell phones have transformed the way we communicate, allowing us to stay in touch with friends, family, and colleagues regardless of distance. Whether it’s a quick text, an important phone call, or a video chat, cell phones have made communication instantaneous and convenient. They bridge the gap between people, providing a lifeline in emergency situations and fostering connections that transcend physical boundaries.

2. Access to Information

Beyond communication, cell phones have become our personal gateways to vast amounts of information. With the internet at our fingertips, we can search for answers, gather knowledge, and stay updated on current events. Whether it’s checking the weather, reading news articles, or accessing educational resources, our cell phones empower us with the world’s collective knowledge, making us more informed and engaged citizens.

3. Work and Productivity

For professionals, entrepreneurs, and freelancers, cell phones have become indispensable tools for work and productivity. With emails, calendars, task management apps, and video conferencing capabilities, cell phones enable us to collaborate with colleagues, manage projects, and respond to business demands efficiently. The ability to work remotely has never been more critical, and cell phones ensure that we can stay connected and productive regardless of our physical location.

4. Safety and Emergency Situations

In times of crisis or emergencies, cell phones can be literal lifesavers. Whether it’s contacting emergency services, alerting loved ones, or accessing vital information, our cell phones provide a sense of Mobile Phone Repeaters security and immediate assistance. Moreover, cell phones can assist in navigation during travel, help locate nearby services, and provide real-time updates on weather conditions or potential dangers.

5. The Challenge of Poor Network Coverage

Despite the tremendous benefits of cell phones, we often encounter frustrating situations with weak or no network coverage. Remote areas, large buildings, and basements are notorious for poor reception, resulting in dropped calls, delayed messages, and sluggish internet speeds. Such limitations can hinder communication, disrupt productivity, and even pose risks in emergency situations.

6. Enhancing Coverage with Mobile Phone Repeaters

This is where mobile phone repeaters, or cell phone boosters, step in to resolve coverage issues. Mobile phone repeaters are devices that amplify weak signals and rebroadcast them, extending network coverage within a given area. By capturing and enhancing the Mobile Phone Repeaters existing signals, repeaters ensure a stronger and more reliable connection, eliminating dead zones and improving call quality and data speeds.

7. How Mobile Phone Repeaters Work

Mobile phone repeaters consist of three primary components: an external antenna, an amplifier, and an internal antenna. The external antenna receives weak signals from the cell tower and transmits them to the amplifier, which boosts the signals’ strength. The internal antenna then rebroadcasts the amplified signals within the desired area, ensuring better coverage for all mobile devices within range.

8. Benefits of Mobile Phone Repeaters

By investing in a mobile phone repeater, users can experience several benefits, including:

a) Improved Call Quality: Mobile phone repeaters eliminate dropped calls and improve voice clarity, ensuring a seamless conversation without disruptions or distortion.

b) Enhanced Data Speeds: With stronger signals, mobile internet speeds are significantly improved, allowing for faster downloads, smoother streaming, and improved browsing experiences.

c) Wider Coverage Area: Mobile phone repeaters extend network coverage within a designated area, providing connectivity in places that were previously dead zones.

d) Battery Conservation: With improved signal strength, cell phones no longer need to search for a network, resulting in reduced power consumption and extended battery life.

Conclusion

In today’s interconnected world, cell phones play an indispensable role in our lives, keeping us connected, informed, and productive. However, network coverage issues can hinder our ability to fully leverage these devices. Mobile phone repeaters, or cell phone boosters, address these challenges by amplifying weak signals and extending coverage, ensuring seamless communication and uninterrupted access to information. By investing in a Mobile Phone Repeaters mobile phone repeater, individuals can enjoy enhanced call quality, faster data speeds, and wider coverage areas, ultimately maximizing the potential of their cell phones in both personal and professional spheres. So, stay connected, stay productive, and embrace the power of mobile phone repeaters for a truly connected experience.

Camera Systems CCTV in a Business Environment: Mitigating Liability and Risk

In today’s business landscape, ensuring the safety and security of your employees, customers, and assets is paramount. One highly effective tool for mitigating liability and reducing risk is the implementation of Closed-Circuit Television (CCTV) systems. CCTV cameras provide a comprehensive surveillance solution that not only deters potential threats but also serves as valuable evidence in the event of incidents. In this article, we will explore the benefits of CCTV in a business environment and how it aids in mitigating liability and risk.

1. Crime Prevention and Deterrence in Dayton, Ohio

One of the primary advantages of CCTV systems is their ability to prevent and deter criminal activities. The presence of visible cameras serves as a powerful deterrent, dissuading potential wrongdoers from engaging in illegal activities within your business premises. The knowledge that their actions are being recorded significantly reduces the risk of theft, vandalism, and other criminal acts.

2. Employee Safety and Conflict Resolution in Columbus, Ohio

CCTV cameras play a vital role in ensuring the safety and well-being of employees. In high-risk environments or industries where conflicts may arise, having surveillance cameras in place helps deter aggressive or inappropriate behavior. The recorded footage can be used to identify individuals involved, provide evidence during investigations, and facilitate fair and swift conflict resolution.

3. Customer Safety and Satisfaction in Cincinnati, Ohio

When customers enter your business premises, they expect a safe and secure environment. CCTV cameras provide a sense of security, reassuring customers that their well-being is a priority. In the unfortunate event of accidents, disputes, or criminal incidents, CCTV footage can be used to determine liability and provide evidence during legal proceedings. By actively promoting customer safety, you enhance customer satisfaction and build a positive reputation for your business.

4. Monitoring and Auditing Operations in Dayton, Ohio

CCTV systems not only serve as a security measure but also allow businesses to monitor and audit their daily operations. By strategically placing cameras in key areas such as entrances, exits, storage facilities, and production areas, you can observe workflows, identify inefficiencies, and ensure compliance with operational protocols. This level of monitoring can help optimize processes, improve productivity, and reduce the risk of errors or unauthorized activities.

5. Evidence Collection for Investigations in Columbus, Ohio

In the unfortunate event of a security breach, accident, or any other incident, CCTV footage serves as crucial evidence during investigations. The high-quality video recordings captured by CCTV cameras can provide detailed accounts of events, helping law enforcement agencies or internal security teams identify perpetrators, reconstruct timelines, and establish facts accurately. This evidence strengthens your position during legal proceedings and aids in resolving disputes efficiently.

6. Liability Protection and Risk Management in Cincinnati, Ohio

Implementing CCTV systems in your business demonstrates a proactive approach to risk management. By monitoring and recording activities within your premises, you create a documented record of events that can be used to protect your business from false claims or lawsuits. CCTV footage can validate or disprove allegations, protecting your business from unwarranted liability and potentially saving substantial costs in legal battles.

7. Remote Monitoring and Real-Time Alerts

Advancements in CCTV technology now allow for remote monitoring and real-time alerts. With internet-connected systems, business owners and security personnel can access live feeds and recordings from anywhere, using their mobile devices or computers. Real-time alerts can notify you of suspicious activities, allowing for immediate response and intervention. This level of control and visibility further enhances security measures, ensuring a proactive and swift response to potential risks.

https://www.cnet.com/home/security/best-home-security-camera/

https://ohiotele.net/business-telephone-systems-public-address-cell-phone-boosters-cctv-and-camera-systems-in-dayton-columbus-and-cincinnati-ohio/

Ohio, a state in the Midwestern region of the United States, is a treasure trove of vibrant cities, captivating history, and rich cultural heritage. Among the many remarkable destinations in Ohio, three cities stand out for their distinctive characteristics and diverse offerings: Dayton Columbus and Cincinnati. Each city showcases its own unique blend of attractions, making Ohio an enticing destination for residents and visitors alike.

Dayton: A Hub of Aviation Heritage

Situated in the southwestern part of Ohio, Dayton holds a significant place in aviation history. It proudly claims the title of being the birthplace of aviation, as it is where the Wright brothers, Orville and Wilbur, conducted their groundbreaking powered flight in 1903. To explore and immerse yourself in the fascinating world of aviation, a visit to the National Museum of the United States Air Force is a must. As the world’s largest and oldest military aviation museum, it houses an impressive collection of aircraft, artifacts, and exhibits, providing a captivating glimpse into the history of flight.

Beyond its aviation heritage, Dayton offers a range of other attractions. The city is home to the Dayton Art Institute, an esteemed museum featuring an extensive collection of fine art from around the world. Additionally, visitors can enjoy the lush green spaces of Carillon Historical Park, which showcases Dayton’s rich industrial and technological past. With its beautiful gardens, historical buildings, and interactive exhibits, Carillon Historical Park offers a delightful blend of education and recreation.

Columbus: Where Culture and Innovation Converge

As the capital city of Ohio, Columbus is a dynamic metropolis known for its vibrant arts scene, thriving culinary scene, and innovative spirit. The city is anchored by the renowned Ohio State University, a leading educational institution that brings a youthful energy and intellectual vibrancy to the area. The university’s sprawling campus is home to a variety of cultural venues, including the Wexner Center for the Arts, which presents cutting-edge contemporary art exhibitions and performances.

Columbus also boasts a flourishing culinary landscape, with an abundance of diverse dining options ranging from farm-to-table eateries to international cuisine. The North Market, a historic public market, offers a culinary adventure with its vast array of local vendors, food stalls, and artisanal products. Visitors can explore the charming neighborhoods of German Village and Short North, where a mix of galleries, boutiques, and restaurants await.

For those seeking natural beauty and outdoor recreation, Columbus doesn’t disappoint. The Scioto Mile, a stunning riverfront park, provides a picturesque setting for walking, biking, and enjoying the scenic views along the Scioto River. The park is also home to the iconic Columbus Fountain, a popular spot for photos and relaxation.

Cincinnati: Where Arts, Sports, and History Flourish

Nestled along the banks of the Ohio River, Cincinnati is a city that exudes a vibrant and eclectic charm. Known Dayton Columbus and Cincinnati as the “Queen City,” Cincinnati offers a wealth of cultural attractions, making it a haven for art enthusiasts. The Cincinnati Art Museum showcases an impressive collection spanning thousands of years and diverse art forms, including works by renowned artists such as Monet, Picasso, and Warhol.

Music lovers will find their haven in Cincinnati, home to the Cincinnati Symphony Orchestra and the Cincinnati Opera. The city’s Music Hall, a breathtaking architectural gem, hosts a wide range of performances, from classical concerts to Broadway shows.

Sports enthusiasts can join in the excitement by catching a game at Great American Ball Park, the home of the Cincinnati Reds baseball team, or cheering on the Cincinnati Bengals football team at Paul Brown Stadium. These sporting events create a sense of camaraderie and energize the city.

Cincinnati’s rich history is evident in its architecture and neighborhoods. The Over-the-Rhine district, recognized as a National Historic Landmark, features beautifully restored Italianate buildings and is teeming with trendy restaurants, shops, and breweries. The Cincinnati Museum Center, housed in the historic Union Terminal, offers a fascinating journey through the city’s history, including interactive exhibits and educational programs.

Dayton Columbus and Cincinnati

Ohio’s cities, Dayton, Columbus, and Cincinnati, offer a captivating array of attractions that cater to various interests. Whether you are drawn to aviation history, cultural experiences, Dayton Columbus and Cincinnati outdoor adventures, or sports events, Ohio has something for everyone. These cities are not only gateways to exploration but also thriving centers of innovation, art, and community.

As you embark on your journey through Ohio, be sure to immerse yourself in the local flavors, discover hidden gems, and embrace the warm hospitality that Ohioans are known for. Whether you find yourself in the vibrant streets of Columbus, the historic sites of Dayton, or the cultural hub of Cincinnati, let the spirit of Ohio ignite your curiosity and leave you with cherished memories of this captivating state.

Business Telephone Systems, Public Address, Cell Phone Boosters, CCTV, and Camera Systems in Dayton, Columbus, and Cincinnati Ohio

When it comes to Business Telephone Systems communication and security systems, businesses in Ohio have a variety of options to choose from. Dayton, Columbus, and Cincinnati are some of the biggest cities in the state, with many companies in need of reliable systems to keep their operations running smoothly. Here are some of the most important communication and security systems that businesses in Ohio should consider:

Unified Communications (UC) Systems in Dayton, Columbus, and Cincinnati

Unified Communications (UC) systems are an essential tool for businesses in Ohio looking to streamline their communication processes. By integrating multiple channels like voice, email, and messaging into one system, UC systems can improve collaboration among employees, enhance customer service, and even reduce costs. With the right UC system, businesses in Dayton, Columbus, and Cincinnati can stay connected and productive no matter where they are.

Public Address Systems in Dayton, Columbus, and Cincinnati

Public address systems are another important tool for businesses in Ohio. By allowing for announcements to be broadcasted throughout a building or campus, public address systems ensure that everyone hears important messages. In emergency situations, public address systems Business Telephone Systems can even save lives by providing clear and concise instructions to occupants. With the right public address system, businesses in Dayton, Columbus, and Cincinnati can keep their employees and customers safe and informed.

Cell Phone Boosters in Dayton, Columbus, and Cincinnati

In today’s world, reliable cell phone coverage is crucial for businesses in Ohio. With the rise of remote work and mobile devices, having a strong cell signal is essential for staying connected. Cell phone boosters can help boost signal strength, improving call quality and data speeds. With the right cell phone booster, businesses in Dayton, Columbus, and Cincinnati can stay connected no matter where they are.

CCTV and Camera Systems in Dayton, Columbus, and Cincinnati

No modern business security system is complete without CCTV and camera systems. These systems can provide valuable insight into daily operations, deter crime, and help identify suspects in the event of an incident. In Ohio, many businesses choose to invest in CCTV and camera systems to protect their assets and employees. With the right CCTV and camera system, businesses in Dayton, Columbus, and Cincinnati can stay safe and secure.

Choosing the Right Communication and Security Systems

Choosing the right communication and security systems can be challenging, but it’s essential for success. Businesses in Dayton, Columbus, and Cincinnati should consider their unique needs and goals when selecting a business telephone system, public address system, cell phone booster, or CCTV and camera system. Working with a knowledgeable provider can help ensure that you select the right system for your business.

Conclusion Business Telephone Systems

In conclusion, businesses in Ohio have many options when it comes to communication and security systems. By investing in Unified Communications (UC) systems, public address systems, cell phone boosters, and CCTV and camera systems, businesses in Dayton, Columbus, and Cincinnati can stay connected, safe, and productive. When selecting a Business Telephone Systems, be sure to consider your unique needs and work with a trusted provider to ensure that you make the right choice for your business.

https://www.bbb.org/us/oh/dayton/profile/cable-installation/ohio-telecom-llc-0322-28678

https://www.facebook.com/Ohio-TeleCom-LLC-164391110287531

https://www.yelp.com/biz/ohio-telecom-dayton

Dimension Electronics dimension electronics dayton ohio